YEAR: 1968

36" Paxson Slitting Line

Consisting of the following:

-Paxson Uncoiler
Capacity: 24,000 lbs. x 36" Wide
Type: 4 Segment Expanding Mandrel
Type Expansion: Hydraulic Wedge
Mandrel Expansion: 17" - 21" (432mm - 533mm)
Mandrel Face Width: 36" (914mm)
AC Motor Threading Drive: 3 HP, 1170 RPM, 230/460 V
Self-Contained Hydraulics: 7.5 HP, 1760 RPM, 230/460 V
Water Cooled Brake: Eaton Airflex
Sliding Base:
Passline Height: 44.5" from Floor to center of Mandrel
Overall Size: 138" L x 67" W x 68" High

-Slitter Head:
5.00" Dia. x 37" Face Arbors
Entry Driven Pinch Rolls
Entry Side Guides
Manual Adjustment
Parallel Arbor Adjustment
7.5 HP AC Motor Threading Drive, 1745 RPM, 230/460 V
5 HP Eaton Dynamatic Ajusto-Spede Drive
1755 RPM, 230/460 V
Thru Drive-All Model DAU 512 Transmission w/1:1 and 3:1 ratios
Line O Power In-Line Reducer w/7.59:1 ratio
Overall Size: 180" L x 94" W x 78" High
12,000 lbs.

-Recoiler:
16" Diameter x 42" Face Drum
7.5" Dia. Main Shaft at Forward Bearing
Manual Clamp and Expansion
Hydraulic Pushoff
Overarm Separator
40 HP AC Motor, 1775 RPM, 230/460 V
Eaton Dynamatic Eddy Current V.S. Drive
Drive-All DAS 896 2 Speed Transmission w/1:1 and 3:1 Ratios
Foote-Jones Reducer w/14:1 Ratio
Passline: 34" from Floor to center of Drum
Overall Size: 198" L x 74" W x 72" High
13,750 Lbs.

-1 Arm Exit Turnstile:
Capacity: 10,000# x 36" Wide Coils
42" Long Arm
C-Hook Slot: 4.5" Wide x 12.5" High
4" Bore Hydraulic Pushoff Cylinder
Manual Rotation
41" from Floor to Top of Arm
Overall Size: 99" L x 48" W x 55" High
5,800 lbs.

-Operators Control Panel:

-Slitter Tooling:

-Less Electrics:

-Line Direction: Right to Left

-In Storage: Toledo, OH.