Affiliated Companies: Excel Industries, Inc. and H.K. Holdings, Inc.

60" x 8.00" x 60,000# Stamco Slitting Line

Ref # 10717-C

Click on photo to enlarge

YEAR: 1996


Coil Width: 60" 1525mm
Max incoming width: 64" 1625mm
Coil Weight: 60,000 lbs. 27000Kg
Coil I.D.: 20" - 24" 508 - 610mm
Coil O.D.: 72" 1830mm
Material Thickness: 0.012" - 0.135" 0.30 - 3.43mm
Line Speed: Low 350 FPM 106m/min
High 825 FPM 250m/min
Line Direction: Right to Left

Consisting of the following:

-Entry Turnstile:
4 C-Hook Type Arms
Hydraulic Motor Powered Rotation

-Entry Coil Car: Chicago
Above Floor Design
Self-Contained Hydraulic

-Mandrel Uncoiler: Chicago
4 Leaf Pumpkin Tooth Design
20" - 24" // 508 - 610mm ID with Hydraulic Expansion
Attached Full Width Holddown Rolls - Powered
Eaton Water Cooled Brake
Hydraulic Sliding Base
AC Motor Threading Drive
Outboard Support Arm

-Automatic Edge Control:

-Entry Unit:
60" // 1525mm Wide Peeler Table
Driven Pinch Rolls, 66" W x 8" Dia. // 1675 x 204mm
Neoprene Covered
Crop Shear - Hydraulic Up Cut Design

-Slitter Head Injector System:
3 Slitter Heads w/8.00" // 204mm Dia. Arbors
Entry Side Guides
Eccentric Arbor Adjustment
Powered Outboard Housing Retraction
DC Drive Motor
Several Sets of Shimless Tooling

-Looping Pit:
Pit Carry Over Table
Looping Pit Doubler

-Scrap Baller:

-Synchrowind Tension Stand:
Combination Drag Pad and Roll Type
Entry Separator Tooling Bar
Drag Pads
Synchrowind Rolls
Exit Crop Shear
Exit Passline Roll

-Recoiler:
20" // 508mm Dia. Drum,
Rubber Sleeves for 24" // 610mm Dia.
Hydraulic Grip & Expand
Hydraulic Pushoff
Horsburgh & Scott Reducer
100hp DC Drive Motor 650-2500rpm w/Blower
2 speed H&S reducer 16:1 and 40:1 ratios
Outboard Support Arm

-Exit Coil Car:
Above Floor Design
66" // 1675mm Wide Deck
Overarm Holddown with Micarta Fingers for Width Adjust
Self-Contained Hydraulics

-Exit Turnstile:
4 C-Hook Type Arms
66" // 1675mm Arm Length
Hydraulic Pushoff
Hydraulic Motor Powered Rotation

-Operators Control Panels:

-Line is removed and stored in Ohio

Your machine has been added to the Cart.

Click the Checkout button below or continue adding machines to the Cart.

0

Main Office  |  723 Phillips Avenue, Bldg. D2 Toledo, Ohio 43612  |  Phone: (419) 841-3586  |  Fax: (419) 841-2986  |  Email: sales@dnhmachinery.com