Affiliated Companies: Excel Industries, Inc. and H.K. Holdings, Inc.

3.000" x 0.134" NEW FMS TUBE MILL

Ref # 9352

YEAR: NEW


(FORMING AND SIZING MILLS MECHANICS ONLY)

MODEL: LM 76-65
HAND OF OPERATIONS: LEFT TO RIGHT
MATERIALS: LOW CARBON STEEL
YIELD STRENGTH: MAX. 50,000 PSI
PIPE OD RANGE: ROUNDS 0.500" TO 3" (12.7 mm-76.3 mm)

PIPE WALL THICKNESS: MIN. 0.023" (.6 mm)
MAX. 0.134" (3.4 mm)

MILL SPEED: MAX. 90 M/MIN. (300 FPM) FOR SMALL DIAMETER
AND LIGHT GAUGE PRODUCTS, REDUCED SPEED FOR
LARGER DIAMETER AND THICKER GAUGE PRODUCTS.
THE MILL SPEED IS LIMITED BY WELD POWER AND
MOTOR POWER ACCOMMODATED TO THE MILL.

-FMS FORMING MILL:
STRIP GUIDE
4 UNIVERSAL DRIVEN BREAKDOWNS WITH SINGLE POINT SYNCHRONOUS HEIGHT
ADJUSTMENT AND DIGITAL POSITION READOUT.
3 UNIVERSAL DRIVEN FIN PASSES WITH SINGLE POINT SYNCHRONOUS HEIGHT
ADJUSTMENT AND DIGITAL POSITION READOUT.
7 IDLE SIDEROLL STANDS
SHAFT SIZE FOR DRIVEN STANDS - 2.50" (63.5 mm)
SHAFT SIZE FOR IDLE SIDE ROLL STANDS: 1.50" (38.1 mm)
MATERIALS: HOUSING FOR STANDS - CAST STEEL
GEARBOXES - RIGID WORM GEAR TYPE
DRIVEN SHAFTS - SNCM 8. HEAT TREATED
IDLE SHAFTS - SCM 4, HEAT TREATED
BEARINGS - JAPANESE BRAND NAME BEARINGS
MOTOR: CUSTOMER SUPPLY, MANUFACTURER SUGGESTED MOTOR POWER: 75 HP

-FMS WELD SECTION:
2 - ROLL SEAM GUIDE STAND WITH ROTARY ADJUSTMENT
3 - ROLL WELD ROLL BOX
TANDEM SCARFING UNIT WITH PNEUMATIC QUICK LIFTING FOR KNIFE
1 POWERED BEAD WINDER
1 IRON ROLL STAND

-COOLING ZONE:
1 - 15' WITH QUENCH (TROUGH TYPE)

-FMS SIZING MILL:
1 DE-TWIST STAND
3 UNIVERSAL DRIVEN SIZING PASSES WITH SINGLE POINT ADJUSTMENT
3 IDLE SIDEROLL STANDS
SHAFT SIZE FOR DRIVEN STANDS - 2.50" (63.5 mm)
SHAFT SIZE FOR IDLE SIDE ROLL STANDS: 1.50" (38.1 mm)
MATERIALS: HOUSING FOR STANDS - CAST STEEL
GEAR BOXES - RIGID WITH WORM GEAR TYPE
DRIVEN SHAFTS - SNCM 8, HEAT TREATED
IDLE SHAFTS - SCM 4, HEAT TREATED
BEARINGS: JAPANESE BRAND NAME BEARINGS
MOTOR: CUSTOMER SUPPLY, MANUFACTURER SUGGESTED MOTOR POWER: 75 HP

-EXCLUSIONS:
ALL THE FOUNDATION FOR THE MACHINE AND THE CONDUIT AND/OR ANY CIVIL WORK.
NECESSARY MATERIAL, EQUIPMENT AND TOOLING FOR THE ASSEMBLY AND RUNNING
OF THE MACHINES, INCLUDING AIR COMPRESSOR, WATER PUMP, VENT STACKS
FOR THE EXHAUST AND ANY REQUIRED GUARDING.
ELECTRIC TRANSFORMERS FROM INCOMING OR TRANSMISSION LINES.
ALL THE INTERCONNECTING ELECTRICAL CABLES AND WIRES.
MATERIAL HANDLING, INCLUDING OVERHEAD AND JIB CRANES.


-TERMS: 30% DOWN PAYMENT
PAYMENT IN FULL BEFORE SHIPMENT

-DELIVERY: APPROX. 150 DAYS AFTER RECEIPT OF DOWN PAYMENT.

-WARRANTY: LIMITED ONE YEAR WARRANTY IF THE MACHINE IS USED AND OPERATED
UNDER NORMAL OPERATING CONDITIONS AND WITHIN THE DESIGNED
CAPACITY. WARRANTY DOES NOT COVER DAMAGES CAUSED BY FORCE
MAJEURE AND CONSUMABLE PARTS. ALSO NOT INCLUDED ARE TRAVEL
EXPENSES BY SERVICE TECHNICIAN.

0

Main Office  |  723 Phillips Avenue, Bldg. D2 Toledo, Ohio 43612  |  Phone: (419) 841-3586  |  Fax: (419) 841-2986  |  Email: sales@dnhmachinery.com